terminal tip 5 index area (d 2 e 2) l e2/2 e2 detail a 2 1 n-1 n (nd-1) x e 8 bottom view c bbb m a b n b 5 datum a or b n r e terminal tip 5 even terminal/side odd terminal/side detail b e e/2 4 c aaa 2 x package information vishay siliconix document number: 72802 16-may-05 www.vishay.com 1 powerpak mlp44-16 (power ic only) jedec part number: MO-220
notes: 1. dimensioning and tolerancing conform to asme y14.5m-1994. 2. all dimensions are in millimeters. all angels are in degrees. 3. n is the total number of terminals. 4. the terminal #1 identifier and terminal numbering convention shall conform to jesd 95-1 spp-012. details of terminal #1 iden tifier are optional, but must be located within the zone indicated. the terminal #1 identifier may be either a molded or marked feature. the x and y dimens ion will vary according to lead counts. 5. dimension b applies to metallized terminal and is measured between 0.25 mm and 0.30 mm from the terminal tip. 6. nd and ne refer to the number of terminals on the d and e side respectively. 7. depopulation is possible in a symmetrical fashion. 8. variation hhd is shown for illustration only. 9. coplanarity applies to the exposed heat sink slug as well as the terminals. package information vishay siliconix www.vishay.com 2 document num ber: 72802 16-may-05 powerpak mlp44-16 (power ic only) jedec part number: MO-220 millimeters* inches dim min nom max min nom max notes a 0.80 0.90 1.00 0.0315 0.0354 0.0394 a1 0 0.02 0.05 0 0.0008 0.0020 a3 ? 0.20 ref ? ? 0.0079 ? aa ? 0.345 ? ? 0.0136 ? aaa ? 0.15 ? ? 0.0059 ? bb ? 0.345 ? ? 0.0136 ? b 0.25 0.30 0.35 0.0098 0.0118 0.138 5 bbb ? 0.10 ? ? 0.0039 ? cc ? 0.18 ? ? 0.0071 ? ccc ? 0.10 ? ? 0.0039 ? d 4.00 bsc 0.1575 bsc d2 2.55 2.7 2.8 0.1004 0.1063 0.1102 dd ? 0.18 ? ? 0.0071 ? e 4.00 bsc 0.1575 bsc e2 2.55 2.7 2.8 0.1004 0.1063 0.1102 e 0.65 bsc 0.0256 bsc l 0.3 0.4 0.5 0.0118 0.0157 0.0197 n 16 16 3, 7 nd ? 4 ? ? 4 ? 6 ne ? 4 ? ? 4 ? 6 r b(min)/2 ? ? b(min)/2 ? ? * use millimeters as the primary measurement. ecn: s-50794?rev. b, 16-may-05 dwg: 5905
|
